The Apothecary Diaries Hueforge - Mao Mao

Boost Me

Be careful if you use PLA other than that indicated, the TD levels may be different and therefore affect the result.

Attention si vous utilisez du PLA autres qu'indiqué, les niveaux de TD peuvent être différent et donc impacter le résultat.

 

Project: apothecary diary Maomao.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 235x235mm in size
You may print at higher layer heights below the Min Depth of 2.1mm
The Max Depth is 3.8mm and the Actual Depth is 3.8mm

 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Bambu Green Transmission Distance: 2.8
    PLA BambuLab Basic Yellow Transmission Distance: 5.5
    PLA Bambulab Basic Indigo Purple Transmission Distance: 0.9
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #12 swap to Bambu Green
    At layer #13 swap to Yellow
    At layer #14 swap to Indigo Purple
    At layer #16 swap to Jade White
    At layer #18 swap to Bambu Green
    At layer #21 swap to Jade White
    At layer #23 swap to Yellow
    At layer #26 swap to Jade White for the rest.

 

Comment imprimer plus de 4 couleurs avec un seul AMS : à partir de 42 sec sur la vidéo

How to print more than 4 colours with a single AMS : from 42 sec onwards in the video