Hueforge AREA51 Death 3 colors

Hueforge AREA51 Death 3 colors

MembershipThank you for supporting me in my work.Boost MeBoost Me PleaSe :p:d

 

Project: AREA51.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x214.08mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.6mm and the Actual Depth is 1.2mm

 

Filaments Used:
    PLA Sunlu/Jayo Black Matte Transmission Distance: 0.1
    PLA Sunlu Red Transmission Distance: 3.5
    PLA eSun Yellow Transmission Distance: 4.9

This print uses 3 unique filaments

 

Swap Instructions:
    Start with Black Matte
    At layer #9 (0.8mm) swap to Red
    At layer #12 (1.04mm) swap to Yellow for the rest.
 

Non-commercial !!!

Please leave a comment and like if you like my Hueforge. Thank you very much.