February 21, 2025
Description
One D20 to rule them all.
I wanted to create a die that had the same printed finish on all of the faces. In order to do this the parts have to be printed face down on the build plate. I accidentally created a finish that completely blew me away.
On a whim I used a tri colour filament in combination with one of Bambu Labs 3D effect build plates (Starry) and the Hilbert Curve bottom surface pattern. This made a glass like print that shimmers in different colours. The hilbert curve bottom surface pattern makes a cool effect when using a tri colour filament because there are a lot of direction changes while printing and every direction change will show a different colour. I have never seen anything like it!
The die comes in 20 pieces numbered from 1 to 20. You can choose to make the die a lucky or unlucky die by adding more twenties or more ones.
There are two options for connecting the pieces together:
The first one, is by using magnets and essentially makes the die a cool fidget toy and a rather difficult puzzle. You will need sixty 5mm x 3mm magnets. You will be limited to the 100% size if you use magnets unless you change the size of the parts to fit the magnets you have.
Magnetic Connectors:
The second option is to use the connecting pins provided. The pins connect the parts securely in a semi permanent manor. If you make the die bigger, make sure you increase the size of the connection pins by the same percentage in Bambu Studio.
Pin Connectors:
License:
Standard Digital File License
Bert Owen
