Kumiko Peg board

My daughter wanted some wall mounted board to organize her tools.

I looked at many, including Ikeas skådis/skadis which seems very popular. But they are all uggly as …

So as many times before i had to design my own. I like Kumiko designs so that is the way i went.

Ta pattern is a pattern called Goma but unfortunatly the holes destroys a lot of the pattern.

But the good thing is that i looked at ikeas boards and the with between the holes are the same, and most of Ikeas hooks/hangers that uses one or more holes in the horizontal plane will fit.

But the vertical distance in my boards is 10,97mm instead of ikeas 20mm. This was necessary to make it fit with the octagonal base of the Goma pattern.

I dont have an ams so i have a pause att layer 16 if you want different colors in the pattern.

There is some hooks and spacers included in the printfile. 

Use 3mm screws to mount the boards to the wall.

I hope you enjoy it!