Thoth Tarot Card Storage Box (for large deck)

I made this box for my sister, who has one of the large Thoth card decks. She also likes to wrap hers in cloth, so there should be enough room for that. The lid fits snugly, but there's no snap, so it's easy on/off. 

I used PolyLite Starlight Mercury and Polymaker Production Matte in black.

Print instructions:

set the layer height to .16

set the initial layer flow ration to 1.01

set inill density to 10 and the pattern to rectilinear

set the outer wall speed to 100, and the inner wall speed to 200

set the acceleration to 7000 for normal printing, 4000 for the outer wall, and 1000 for the top surface

set the prime tower to 15 x 15

I reduced the flushing volume coefficient to .5