LUXE Rubbish Bin - Fancy Fidget Trash Can

FUNCTIONAL & FUNNY; Beautifully Overkill!

• NO SUPPORTS

• CUSTOMIZABLE INSERT (download included STEP file)
  • Here's the collection

• Maker's Supply Hardware ($12.22)

• XL VERSION HERE

• Captive Bearings for Wheels (pause for insertion) 

  • The wheels are a built-in fidget spinner! Don't believe me?? I challenge you NOT to spin the wheels when it's sitting in front of you (I guarantee everyone who picks it up will spin the wheels! Usually before they open the lid). You can't not spin them. You will spin them. You must spin them. The wheels must be spun. 
  • My wheels are printed with TPU for AMS. I recommend using TPU as it just adds an extra somethin' somethin' to the print.

 

• Install Snap-Fit Grab Bar 2x30mm Stainless Steel Dowel Pin - DA013 (Totally my favorite part!) like so:

 

• Install the M3x25 Double-pass Knurled Brass Stud - AD020 like so with a soldering iron:

(You can also use a lighter on this one; but be careful of cooking the plastic and your finger!)

 

• Install the M3x5x4 Round Threaded Brass Heat-Insert Nut - AB012 like so with a soldering iron:

 

• Install the 608 Open Hybrid Ceramic (2PCS) - EA029 when the printer pauses like so:

  • Any 608 bearings may be used, but the Open Hybrid Ceramic bearings are recommended. They look cool, they spin forever, and they do NOT leak lubricant onto your build plate.👍

WHEEL NOTES:

1. The included print profile pauses at Layer 61 (12.2mm) for bearing insertion.

   1. Make sure you have bearings on-hand prior to printing the wheels! You won't be able to (easily) add them after printing; as they will be encapsulated by a hexagon as shown in the following image:

2. I recommend using the Maker's Supply 608 Open Hybrid Ceramic bearings. They spin forever and they look so much cooler!  I know they're not cheap… but you won't regret getting the nicer bearings once you have them installed and give them a spin.😉

 

 

This was a lot of fun to design, assemble, and use!  Guaranteed to be the perfect statement piece for your workspace (almost everyone that sees it on my desk wants one of their own).

 

MANY uses, here's a few:

 

I UPLOADED A CUSTOMIZABLE INSERT (.STEP File) SO FEEL FREE TO CUSTOMIZE THE INSERT & TAILOR YOUR RUBBISH BIN TO FIT YOUR UNIQUE CHAOS!! 

Pictured below is my pen holder insert: 

Comment or DM me with a link to your custom insert so I can add it to the collection!

(Comment or DM me with specific requests if you don't feel up to the challenge!)

 

Please consider leaving a like so this model gets some attention!

Boost MeBoosts are very much appreciated!!

Out of boosts? You're welcome to “buy me a coffee” if you really like this model & want to encourage me to make more.😉

MembershipWant to sell physical prints of my designs?? Please do it legally by subscribing for a commercial license.👍

Feedback is welcome!

 

ENJOY!