Flat braid embroidery hoop

4" embroidery hoop with a braided design around the outside. This is printed face-down so make sure your flow ratio is dialed in before printing.

 

The tolerances are sized for aida fabric. If your fabric is significantly thicker or thinner you may need to resize the inner ring, I suggest adjusting it in 0.1mm increments.

 

To use, place the inner hoop on a flat surface, with the first layer color on the bottom. Then place the fabric over it, positioning the stitching over the hoop. Lastly, press the top hoop over to secure everything in place.

MembershipWant to use these in work you sell? Sign up for a commercial license!