Goku

Boost MeIf you like this model let me know it with a boost

As well as my other models you can resize this in X and Y but not in Z

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.35x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2mm

 

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA+ Sunlu Orange Transmission Distance: 5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to Orange
    At layer #19 (1.6mm) swap to Jade White for the rest.