2025-03-09 Update: V2 now has stronger label holder!
This is a clip/tag for ethernet cables. Use this to attach laminated labels printed from a Label maker like a Brother P-touch labelmaker.
- The size of the area to attach the label to is 9 x 40mm. (My Label maker uses 9mm tape.)
- These are intended for cables from about 4.3 to 5.3mm in diameter.
- In my testing with PETG they snapped on without problems and stayed on reliably.
- I did not yet try printing them in PLA.
- The print orientation is important for strength! Do not print them flat.
- You can increase the number to be printed in Bambu Handy (look for ‘Copies in a plate’) or Bambu Studio (use the Clone function)
Let me know if you'd like me to provide different sizes!
Boost MeBoost appreciated!
History:
- 2025-02-22 Released initial version in 9x40mm label size
- 2025-03-09 New version V2: Increased the thickness of the label holder from 1 to 1.5mm to increase strength
hb2024
