RayBan Meta Clip On Sunglasses (Wayfarer Large)

I bought some RayBan Meta glasses and replaced the original lenses with prescription lenses from Lensology : https://lensology.referral-factory.com/uhp6NfS8

These clip ons are for the original Ray Ban lenses that were installed in the frames at time of purchase. They are designed for the Large version of the Wayfarers.

INSTALLATION NOTE:

As the lenses are curved, and the print comes out flat, you must do the following for the lenses to correctly fit and stay:

1. After printing, remove model from bed and remove supports from clips
2. Use printer menu to heat build plate to 70C
3. Place model back on bed for 30 secs to heat up
4. Insert one lens and use the heated plastic to comform to curvature of lens
5. Repeat steps 3 and 4 for other lens
6. REMEMBER TO SET BUILD PLATE BACK TO 0

Inspired by @Found18 on Thingiverse:

https://www.thingiverse.com/thing:6851113

P.S. 

Damn, fusion is hard when you have no experience