February 23, 2025
Description
No AMS needed, you can manually set pauses at filament changes.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 146.41x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #11 (0.96mm) swap to Yellow
At layer #15 (1.28mm) swap to White for the rest.
License:
BY-NC-SA
JPS
