Didgeridoo ( D2 Full Size)

UPDATES - Scroll to bottom for Versions and New Parts! 

See it in Action!

YouTube Video above shows playing the didge straight out of the machine.  Simply screw all the pieces together and play. No supports needed.   

 

Great for traveling! Unscrew it and throw it in your bag. 

Perfect for sound healing, lightweight and large bell for covering the body with sound waves. 

 

 

PRINTING

Can you print a full size didge on an A1? YES! Or if you have a larger machine you can print the entire didge on ONE plate. The didge uses a whole roll of filament.  I love that you can make this quality didge for under $20. I have had no issues printing this yet. I use a .4mm nozzle and .2mm layer height. 

 

I always use Purple Elmer's glue sticks and have had no bed adhesion failures. If you're using a finicky filament and want to be extra cautious you can add a Brim to the pieces. 

 

DESIGN

Typically didgeridoos are made of heavy wood which makes traveling and using for sound healing difficult. 3D printing one in plastic that unscrews solves both of these challenges! Plus, it opens up the possibility of making lots of different attachments.  I made 28 iterations to get this right. I've strengthened all of the sections that screw together and made the body as hollow as possible. I tested many different bell shapes. This one is my favorite, it sounds great. 

 

If you would like me to upload additional segments for other keys, or release different bells, I'm thinking of making it into a kit. Let me know in the comments. 

 

ASSEMBLY

1 x Bell

1 x Mouthpiece

6 x Columns (Add subtract columns to change tone)

 

This print is pretty easy to figure out how to assemble without directions. Screw all of the pieces together.  The single plate contains six columns, one mouthpiece, and one bell. This makes a D didgeridoo. If you take away a segment or add an extra segment you change the tone. The longer the didge, the deeper the sound. If you are just learning, start with five sections and work your way up to six. With eight segments it sounds interstellar and eerie! 

 

Try printing the sections in different colors and make something extra unique. I'd love to see pictures of what you make.  

 

PLAYING TIPS

1. Producing the Drone

• Lip Vibration:
  • Relax your lips and allow them to vibrate naturally as you exhale.
  • Aim for a continuous, steady sound by maintaining a relaxed embouchure (the way you shape your lips).

2. Circular Breathing

• Concept:
  • Inhale through your nose while simultaneously using stored air in your cheeks to continue playing.
• Steps:
  • Puff your cheeks and hold the air.
  • Exhale from your mouth slowly.
  • Quickly inhale through your nose as you allow the cheek air to flow out.
• Practice:
  • Start with short bursts and gradually increase the duration.
  • Practice without the didgeridoo first, then integrate with playing.
  • Another exercise I like is to blow bubbles through a straw in water while inhaling through your nose. 

3. Embellishing Your Drone

• Vocalization:
  • Add vocal sounds or hums while playing to create rhythmic and harmonic variations.
• Rhythmic Patterns:
  • Experiment with simple patterns, like alternating between low and high overtones.

Practice Tips

• Warm-Up:
  • Begin with simple lip exercises to relax and prepare your embouchure.
• Short Sessions:
  • Practice daily for 5–10 minutes, gradually increasing as your control improves.
• Record and Listen:
  • Record your sessions to track progress and identify areas for improvement.
• Stay Patient:
  • Mastering circular breathing takes time. Consistent practice is key.

 

UPDATES

Follow me to get updates of new attachments

 

Version History:

V3 changes the seam placement. The original seams were random and created small protrusions, V3 changes this and now the seams are aligned which looks much better, especially in shiny filaments.  

 

V2 updated fill to cross hatch to be lighter and stronger

 

Attachments:

I have added two new optional pieces based on feedback from comments. If you have an idea, or a need for another attachment, let me know. 

 

 

 

New Attachments	Click Image to go to page
U TURN Section.  This replaces one of the columns so that the bell faces you when playing. This is awesome for learning and practicing as you hear the sound very clearly. It's also very relaxing.
Extra Large Mouthpiece If you find the standard mouthpiece too small, this one is bigger.
Have an idea for a new attachment? Leave me a comment or let me know if the following ideas are interesting:   Guitar strap attachment for wearing your didge. Smaller bell for traveling.  A muffler to practice more quietly

 

 

Check out my download page for the matching EGG SHAKER. 

Boost MeIf you like this, please consider a boost!