Telescope Solar Filter & Case.

An attachment for your Telescope designed to hold 100mm (4") square sheets of solar filter. It will work with other filter sheets too of course.

Read about the filter on instructables | http://www.instructables.com/id/Astrophotography-With-the-Raspberry-Pi-Zero

Optional case to protect your filter when not in use.

It will fit on telescopes with a dew shield up to 100mm (4") in diameter.

STLs chamfered and orientated for best printings.

Print with your favourite thermoplastic | http://e3d-online.com/All-Filament

Required Components

• 1 x 100mm (4") Square Sheet of Filter.
• 8 x M3 16mm Socket Cap Screws.
• 8 x M3 Square Nuts.
• 4 x M4 16mm Socket Caps Screws.
• 4 x M4 Square Nuts.

For news, updates, and inside information, plus options to help support my work, visit http://ko-fi.com/gregthemaker

Print Settings

Printer: 

E3D's BigBox

Rafts:                      

No

Supports: 

No

Resolution:                      

0.25mm

Infill: 

15%