Thwomp Multi-part model Desktop Box and Medallion

Thwomp Box and Medallion (Multi-part No AMS Needed)

This was a super fun model to design and print. The parts are all printed in single color and glued together. The eye parts were too small to print labels into so watch the left and right parts go on the correct sides, everything else only fits one way. When I'm printing models with similar but not the same left and right sides I find it helpful to separate them into zip locks with left and right stickers on them until its time for assembly.  The teeth have slots in them on the bottom they should press in nicely but still need to be glued in place. All the glue is internal so making a gluey mess shouldn't happen. 

There are a few printing options, because of this the print time looks excessive. Even if the print time is absolutely wrong to complete one model, I would rather show a crazy long print time on Makerworld than break it up into separate print files (much easier for everyone with it all in one file imho). The basic front is used with any of the basic backs or the desktop box, the medallion front is used with the medallion only.

All printed using Bambu filaments. Hope you like it!!!

Printed in:

Bambu Basic PLA White

Bambu Basic PLA Gray

Bambu Basic PLA Red

Bambu Basic PLA Black

I have lots of fun free models. All tested and ready to print.

Check my profile here: https://makerworld.com/en/@phillipjfry

Maybe consider a boost or buying me a coffee, I go through lots of it, thanks.

Have a great day and happy printing!!!