Han's Halo Dual Monitor Riser (over 30ins Long)

Hello Everyone, this is an original design (NO TREES WERE HURT IN THIS PROCESS) LOL JK

I designed this model as a work from home work station HUB. If you need assembly documentation I will provide upon request. If you would like to customize and change out the Legs using STEP, IGES or SLDPRT will be provided upon request. This is only customizable on the Legs. I built the top with a Spline so it might be a little difficult to recreate or modify the table top. You will need a parts List to complete this. 

listed below. 

Parts List: 

1/8" Round Plexiglass Sheet, 8 Inch Diameter Clear Acrylic Circle,

https://www.amazon.com/dp/B09ZT3G8GZ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

1/8" Round Plexiglass Sheet, 12 Inch Diameter Clear Acrylic Circle

https://www.amazon.com/dp/B0C2HXVGL8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

M6 x 25mm 20Pcs Flat Head Hex Socket Cap Screws Bolts Black Ocide

https://www.amazon.com/dp/B0CRTRV8SP?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
 

Scotch Clear Adhesive Bumper Pads ½" or smaller (walmart) 

Small Bracket for under support. just 1 is enough. (lowes)

LED Lights (walmart 4 ft) 

 DO NOT PRINT WITH ANYTHING OTHER THAN BAMBU IF YOU DARE just Kidding. 

I printed this with the rest of my Elegoo Matte Black Filament and Bamboo Matte Black Filament. 

The Table Top needs to be printed at least 50% density and 6 walls. You can play with these settings but I would advise against it. 

The legs can be printed at atleast 30% and 4-6 walls. you can play with these settings. Please create your own custom legs. As you can see in my pictures my legs are custom. I left the legs clean on this print to see what amazing alterations you guys come up with. Everything is optimized from the first Print. 

I have the original Fileset for the Picture you currently see as my workstation. I removed a few things and made it a little bit more assembly friendly.