February 25, 2025
Description
Please leave a rating or comment if you like the print!
Want to sell my prints? Commercial License now available here: https://patreon.com/3ReePrinting
MembershipCommercial License is also available here!
Check out the rest of my Hero/Villain series here: https://makerworld.com/@3ReePrinting/collections/3340968
Local request to go with the other set of FF7 characters! Yellow is an acceptable substitute for Gold.
This print is the maximum build plate size for an A1 Mini, but it should work on any printer.
Boost MeThank you for the support!
If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same position
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Gold Transmission Distance: 2.8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #14 (1.2mm) swap to Gold
At layer #20 (1.68mm) swap to Jade White for the rest.
License:
Standard Digital File License
3Ree Printing
