Kill Tony Hueforge Poster

For the Kill Tony fans out there!

No AMS necessary, you can use pauses instead and change filaments manually. There is also 2 .stl files provided. One is with and another is without the border.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150.28x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Red

At layer #14 (1.2mm) swap to Yellow

At layer #19 (1.6mm) swap to White for the rest.

Check also my William Montgomery statue:

https://makerworld.com/en/models/1378405-william-montgomery-statue