Fuse Beads - Iron to Fuse!

Disclaimer: PLA is the only filament that will work with these beads

Upcoming updates:

• Boards for designs
• Packs/print profiles for certain designs/images (certain amount of each color)

How to Use:

1. Use a board to create an image/design using the fuse beads

    

2. Place a sheet of wax paper on the design

   3. Set the Iron to the highest heat setting and press the iron onto the design with medium force for 2-3 seconds (If you want more control over the thickness of your design, set the iron to a lower setting and press for longer)

   4. Take the Iron off of the design (if the wax paper is stuck to the Iron, carefully peel it off from the edge) and let the design cool for 20-30 seconds with the wax paper still on it

   5. Peel of the wax paper