English Bulldog Puppy Head Succulent/Flower Pot

English Bulldog head planter, ideal size for small succulents.

Will fit a small pot size 56mm wide x 53mm high.

Have added two print profiles, a one piece version and one with separate eyes, snout and nose if you'd like to make it multi colour without AMS (am still working on the way I split my models so it's not perfect but looks fine when assembled with a bit of glue)

Eyes are labeled L & R, it's the models Left and Right when looking from behind it, glue the snout in before the nose, the nose should sit nicely in the gap left.

In the print profiles I have used 60% lightning infill for the head which only provides support where needed and 3 walls so hopefully should not leak if there is a bit of water in it.

Use normal supports for the ears, tried with tree and a small edge kept curling up a bit and getting hit by the nozzle so normal grid support is a better for this.

Also the snout is printed in the orientation it is to ensure dimensional accuracy, if you lay it flatter the supports interfere when fitting and the edges don't line up as well, just ensure you clean your bed for good adhesion.

Feedback and ratings all welcome, if you like the model please give a boost and a like, thank you!