旋转结构零件盒子Rotating structural parts box

旋转结构零件盒子Rotating structural parts box

打印:
层高0.2
中心轴填充密度不低于50%
其他填充15%

尺寸:60x60 100x100 150x150 200x200
小盒子:30x30 50x50 75x75 100x100
小盒子高度:25 45

其他材料:
胶水
沉头螺丝:m2.5x10
金属销轴:m2x10

原理来自网络上木工制作的旋转果盘,与市售的花型双层旋转果盘实现原理不同好像.
仅作结构原理理解用,不推荐做零件盒.市面上有更实惠的成品.
但是提供更大尺寸和不同高度的文件,我不打印是因为大平面翘边令我头疼,所以没有打印验证.
当你决定打印大文件后最好:
1打印迷你版本了解结构
2加强中心轴填充强度
3打印单个小盒子验证结构和强度

没有做双层,多层,怕打印的中心轴强度不够,就没设计了

Print:
Layer height 0.2
Center shaft filling density not less than 50%
Other filling 15%

Size: 60x60 100x100 150x150 200x200
Small box: 30x30 50x50 75x75 100x100
Small box height: 25 45

Other materials:
Glue
Countersunk screws: m2.5x10
Metal dowel pin: m2x10

The principle comes from the wooden rotating fruit plate made by a woodworker on the Internet, which seems to have a different principle from the commercially available flower-shaped double-layer rotating fruit plate.
It is only used for structural principle understanding, and it is not recommended to make parts boxes. There are more cost-effective finished products on the market.
However, I provide files with larger sizes and different heights. I did not print them because the large plane warping made me headache, so I did not print and verify them.
When you decide to print a large file, it is best to:
1. Print a mini version to understand the structure
2. Strengthen the center shaft filling strength
3. Print a single small box to verify the structure and strength

I did not make double-layer or multi-layer, I am afraid that the center shaft strength of the printed product is not enough, so I did not design it.