Cherry Blossoms by Moonlight - Bookmark Set

With the arrival of Spring, the annual cherry blossom season is upon us. My wife loves them and has been wanting to go see them. While a visit to observe them is in the future, this will just have to suffice for now. One is based on the traditional Japanese art and the other is based on a more natural setting observed at night under the moonlight.

Cherry Blossoms by Moonlight Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 96x150mm in size
 

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.4
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Magenta Transmission Distance: 7.6
    PLA Default White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At height depth (0.88mm) swap to Red
    At height depth (1.04mm) swap to Magenta
    At height depth (1.12mm) swap to White for the rest.