Versatile Storage Container

A container that has a lock mechanism, so you dont need to tighten the lid to ensure it stays in place.
Furthermore it has a removable, easy and quick to print label that can be labeled either by hand or via the
text function inside Bambu Studio. It comes in three different sizes that makes it also easier when you want
to scale it. The seal printed in TPU is optional.

Plate 1 ( Medium )
Plate 2 ( Large )
Plate 3 ( Small )

Plate 4 ( Extra - No lock )
    If you prefer no lock and want to tighten the lid instead a version without lock is provided.
    Instead of the locking part use the dummy.

Plate 5 ( Extra - Lid with hole )

Plate 6 ( Extra - Seal )

    The thickness of the TPU seal is calculated to be 1.0 mm.
    Due to different filaments and scale factors, print tolerances may vary and therefore 
    we also included seals with 0.8mm and 1.2mm thickness.
     
Plate 7 ( Support - Lid with hole )

    Lid with hole is using bridging inside ( not visible ) due to its print orientation. 
    If you like a cleaner look or you scale it up inside Bambu Studio we recommend to print
    it with support. This type of support uses the fact that PLA and PETG do not stick together.
    Therefore we use the opposite filament for the interface ( 0.4 mm ) - e.g. PETG when printing in PLA.
    This gives a really clean look and no extra work is needed.
    When not using a purge tower a filament purge volume of 600 mm3 is recommended.