Piranha Plant Magnet

This Piranha plant finally completes the set of the Mario fridge magnets.

 

Powered by MakerWorld-Image to Keychain (https://makerworld.com/makerlab/imageToKeychain)

 

This design was originally made by @BenchyMaker, and later added on to by myself. I published many different print profiles of the following pieces in the photos above just look for the profile posted by me, It will have the correct sizing and what not shown in the pictures. The links are here:

 

Original set: https://makerworld.com/en/models/555893-super-mario-fridge-magnets?from=search#profileId-474659

Grass: https://makerworld.com/en/models/971766-super-mario-magnet-grass#profileId-943942

Mushroom: https://makerworld.com/en/models/13158-mushroom-mario-keychain#profileId-1130863

Goomba: https://makerworld.com/en/models/892448-color-goomba#profileId-1130911

Coin: https://makerworld.com/en/models/576456-super-mario-coin#profileId-1130935

Peach: https://makerworld.com/en/models/401313-princess-peach-supermario-keychain#profileId-1130855

Bowser: https://makerworld.com/en/models/58950-multicolor-bowser-magnet#profileId-1130877

 

I used 6x3 magnets for the piranha plant magnet, but you can always change them in bambu studio. I also used a few 8x2 magnets in some other print profiles, just make sure to compensate for the Z height if you change the dimensions.

Boost MeHelp me expand on this set with show of your support for Mario magnetsMembershipIf you would like to sell prints of this model, subscribe to my commercial plan for only $3 a month