Trump Zelenskyy Meeting(Scolding)

Project: Trump Zelensky.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x133.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Default White Transmission Distance: 5
    PLA PolyLite red Transmission Distance: 4.7
    PLA Default black Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to White

Border Only Colors from here until the end.
    At layer #20 (1.68mm) swap to red

This slider is set higher than the mesh depth.  It is not affecting your final mesh.  Consider removing it.
    At layer #26 (2.16mm) swap to black for the rest.