Wall-Mounted AeroPress Organizer

Single or Multi - Custom-fit and rugged AeroPress storage solution, modular and expandable, designed for wall mounting.

This Wall-Mounted AeroPress Organizer is a custom-fit storage solution designed to keep your AeroPress components neatly arranged. The design accommodates the AeroPress chamber, plunger, cap, and metal filters while maintaining a rugged and functional aesthetic.

Required Hardware (per AeroPress element):

• Mounting the shelves to the rear wall element:
  • 4x M4 heat set inserts (M4x4 or M4x8.1, doesn't really matter)
  • 4x M4x10 SHCS
• Connecting multiple elements together:
  • 4x M3x3 heat set inserts
  • 4x M3x4 SHCS

The organizer consists of three main parts per element:

1. Rear wall mount
2. Bottom shelf for the chamber
3. Upper shelf for the plunger and filter

These elements are secured with two slide-in back mounts for easy assembly.

For wall mounting, I used 3M 1600T double-sided tape, which has been holding up well. However, a modification for screw-based wall mounting (adding holes to the white strips) would be possible in Onshape. If needed, feel free to reach out for assistance with that.

Printing Considerations:

The design is optimized for easy printing with minimal support requirements. I printed the rear walls flat with snug supports, which were pretty easy to remove. Printing upright will possibly also work well.

For modifications, access the Onshape model here. There you can also find the model files of the AeroPress for reference, if you'd like to create your own accessories.