Stackable Gridfinity Apple Watch Band Holder

We designed a simple Gridfinity Apple Watch band holder which is stackable.

 

There are four Gridfinity sizes available with high walls to enable to stack on and with low walls, if you preffer to display your bands and don´t want to stack another Gridfinity box on top.

• 1 x 4 Gridfinity grid units
  • holds 3 watch bands
  • low walls version: 167.37mm x 41.38mm x 24mm
  • high walls version: 167.37mm x 41.38mm x 46.85mm
• 2 x 4 Gridfinity grid units
  • holds 7 watch bands
  • low walls version: 167.37mm x 83.38mm x 24mm
  • high walls version: 167.37mm x 83.38mm x 46.85mm
• 3 x 4 Gridfinity grid units
  • holds 11 watch bands
  • low walls version: 167.37mm x 125.38mm x 24mm
  • high walls version: 167.37mm x 125.38mm x 46.85mm
• 4 x 4 Gridfinity grid units
  • holds 14 watch bands
  • low walls version: 167.37mm x 167.37mm x 24mm
  • high walls version: 167.37mm x 167.37mm x 46.85mm

To allow easy access, we have designed a recess to this model.

 

No Gridfinity option needed?

If you preffer, to display your Apple Watch watch bands in a more lightweight model, you can check out our similar Apple Watch Band holder without gridfinity.

 

The gridfinity project was released by Zack Freedman. - Kudos to Zack

Check out the gridfinity community homepage and watch Zacks youtube video of gridfinity:

 Gridfinity Tips!

• No brims or support required!
• Use any filament with an 0.6mm or smaller nozzle.
• Wider bins can curl, so maximize your bed adhesion if you're going big!
• All storage blocks are compatible with all baseplates!
• Most storage blocks are stackable!
• You can add 6x2mm magnets to the corners! They won't magnetize the contents.
• You can also use M3 screws in the corners.

Boost MeHey there, if you enjoy our work, feel free to boost us.
We wish you "happy printing" ;)

Check out our other Gridfinity Models