HP CP1025 Printer Paper holder 接纸支架 Accessories

惠普激光打印机 CP1025的纸张支架

这款打印机的纸张支架是很容易损坏或丢失的，缺少支架会导致打印完成的纸重新掉入机器，造成卡纸，可以打印这个支架进行替换，需要准备双面胶和一截耗材丝（灯丝），打印完成后插入耗材丝，两端预留五毫米，用打火机稍微加热后推动变形，防止耗材丝掉出来，实际测试可以正常使用

轴销孔的尺寸是直径2.2毫米，如果插入困难可以适当调整。

------------------------------------------------------

Paper holder for HP laser printer CP1025

The paper holder of this printer is easily damaged or lost, and the lack of a holder can cause the printed paper to fall back into the machine, resulting in paper jams. This holder can be printed for replacement, and double-sided tape and a section of consumable wire (filament) need to be prepared. After printing is completed, insert the consumable wire, leaving a 5mm gap at both ends. Heat it slightly with a lighter and push it to deform to prevent the consumable wire from falling out. In actual testing, it can be used normally

The size of the shaft pin hole is 2.2 millimeters in diameter, and can be adjusted appropriately if insertion is difficult.