Super Lube Applicator Caps for A1 / A1 mini / A2L

UPDATE v2:

• tighter fit
• increased ducts size for improved flow

You don't need to reprint the case if you already have v1 and want to update to v2. Pick the print profile for just the Caps.

 

These oil applicator caps will help you apply an even coat of oil to the linear rails and rods of your A1 / A1 mini / A2L 3d printer. They fit standard 4 oz / 118 ml Super Lube / Synco Lube bottles (51004 / 52004 / 53004 etc.). The carrying case is designed so you can attach the applicators to your bottle without touching it, so your hands will not get greasy. It also has room for the original bottle cap.

I recommend using Super Lube multi-use synthetic lightweight oil (52004)

 

 

Information about build plate adhesion

It's generally possible to print the tips without a brim. Depending on the material used it can be challenging. If you have trouble with build plate adhesion you can add a brim. 

 

 

A print profile for gridfinity bins (both for the kit alone or kit + super lube bottle) is available.

 

Boost MeThank you for your support!