Magnetic build plate wall mount 6 x 256x256mm plates X1C, P1P, P1S, A1

Here I introduce you to my magnetic buildplate holder (6 plates)!

There are probably easier ways to store your buildplates, but for people who like magnets it's just the thing.

The printing takes around 6,5 hours and requires 230g of filament. You will also need the following magnets https://amzn.to/47mfPqt (affiliate link). You need a minimum of 12, but if you want more magnetic force, you can put up to three into each of the upper holes and even more in the holes at the lower side. I decided to use 2 in the upper holes and one in the lower holes.

The screws for attaching the holding plate to the wall may be a maximum of 4mm thick, the length depends on the type of wall you have.

Make sure your filament is calibrated, otherwise you will have problems while inserting the magnets and removing the support.

Please let me know if you have suggestions for improvement, happy printing :-)