Drag chain Cable Organizer For Monitor Risers

Boost MeWant to help out? boosts keep me tinkering. Thank you! 

Drag Chain / Cable Organizer for Monitor Risers & Standing Desks

Are messy cables cluttering your desk? Struggling to manage wires through your monitor arms?

 

This Drag Chain is the perfect solution for routing cables from your PC or power source on the ground to your Standing Desk—keeping everything neat and organized. If you have monitor risers, this system also helps you tuck away all your wires out of sight for a cleaner setup.

 

Each print is designed for easy assembly, optimized (but not required) for a 0.4mm nozzle. Every plate includes a brief title describing the part for better organization.

 

DO NOT USE PLA, THE TABS WILL BREAK. I RECOMMEND PETG 

Boost MeThis model took me several days to design, and I went through multiple prototypes to perfect it! If you enjoy my work, consider supporting me with a Boost—each one gives me $1.50 CAD in store credits. Every Boost helps me continue creating and refining my designs, and I’m currently saving up to upgrade my printer. I’m already over halfway there! 🚀

Your support means the world to me, and even a small Boost makes a big difference. Thanks for helping me bring more awesome 3D prints to life! 🙌

 

Explainations: 

1. 1. these are just the standard Drag chain links, they are used behind the monitors and  they are used for the standing desk to the ground. or PC, the orientation is reveresed to what most people think, this is due to the taper on the male clip that made the links support free. 
   2. No supports are neeeded but it do use Brim ears on the thin areas. 

2. the Riser should look like this, add the 4 way split on top

    

   1. The Under Desk Mount is either screwed under the desk or taped on with strong double sided tape. 
   2. The Riser links are designed to not have any piviot  to them.  together the mount and the risers sopport the 4 Way Splitter
   3.  
3. 1. The 4 Way split allows the drag chain to span to Two or more Monitors, the standard links Securly mount into this adapter

   2. The  Links should fit onto the 4 way plate as show  in the second screenshot  ( they will not fit perpendicular to the plate) 

      
       

Boost MeThis model took me several prototypes to perfect it! If you enjoy my work, consider supporting me with a Boost—each one gives me $1.50 CAD in store credits. Every Boost helps me continue creating and refining my designs, and I’m currently saving up to upgrade my printer. I’m already over halfway there! 🚀

Your support means the world to me, and even a small Boost makes a big difference. Thanks for helping me bring more awesome 3D prints to life! 🙌