Working Landing Gear For Paper Airplane

Like this model? Help me make more by boosting :) !

Boost MeLike this model? Consider Boosting :) !

After many iterations i now can finally present you a working landing gear for a paper airplane, Yes its that cool :)))) !

It works especially on flat surfaces where the wheels can roll freely. You must make sure to create a plane that resembles mine with the same amount of clearance etc. :) enjoy !

Make sure to follow the assembly guide:

1. Assembly the wheels and get an A4 Paper

   2. Fold the Paper in Half and unfold it again

   3. Fold in the corners

   4. Now fold in again to create an arrow like structure

   5. Fold it together again 

   6. Take a plate and fold one wing there should be roughly 1 cm clearence then repeat with the other wing

   the part where you will hold the plane will be quite small

   7. Using a plate mark a hole at the front

   8. Using a stapler cut out the hole

   9. Push the front wheel on one side and secure it with a plate

   10. Slide on the backwheels making sure the plane is balenced

   11. Refold one last time to make sure only the wheels touch the ground

   Have fun with your landing gear :) !