March 7, 2025
Description
Hueforge of Itachi Uchiwa from Naruto
The photos shows the result in 200*150mm and a nozzle of 0.4
You can change the X and Y dimensions but do not change the Z dimensions
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
You can use filaments other than those indicated, but the result will differ.
You can use any black PLA
Hueforge description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Magenta Transmission Distance: 3.5
PLA BambuLab Basic Marron Red Transmission Distance: 1.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #8 (0.72mm) swap to Dark Blue
At layer #9 (0.8mm) swap to Magenta
At layer #13 (1.12mm) swap to Marron Red
At layer #15 (1.28mm) swap to Red
At layer #18 (1.52mm) swap to Jade White for the rest.
License:
Standard Digital File License
Altf4-Formation
