"Tilted Tower" Dice Tower with built in Dice Jar

Want a dice tower, tray and dice jar all in one? Want that tower to have a bit of tilt to it? Then do I have the print for you!.

My “Tilted tower” features 3 windows you can feed your dice into as well as a hole in the top to allow for maximum dice mayhem.

The top of the tower unscrews to reveal a secret dice jar that fits at least 2 sets of 20mm dice.

The chute should fit any dice under 30mm and from what I've tested rolls them pretty well.

Edit: I added a second “Base” Model option, this one adds 10mm to the railing height in case dice fly off with the standard height, though I have not experienced that in the original.

Printing:

Base- Use 25% Infill and 3 walls so the base stays sturdy without sacrificing print time. You only need supports for underneath the railing, everything else will print great without any supports.

Top and Screw- 2 walls and 15% infill work just great, you don't need any supports.

This was a fun project for me to test out what I've learned so far in design, so It may not be perfect but I'm still really proud of my not so little guy. 

If you like my designs, please consider taking a look at my Patreon

Happy Rolling!