Guitar Holder (auto-closing / opening)

UPDATE 25.12.2025: As new Bambu parts are available I added one of the springs. I havn't tested it yet as I do not own it but it should match perfectly:

 

 

Hi guys,

 

this is my self-closing / opening guitar holder. Except the screws all parts are printed :) You need 4 x M3 Screw (5mm). 

 

Update 25.12.2025: I also added the spring to the part list. You can still print it but for the long term I would recommend the other one.

ATTENTION:

DO NOT USE MATT / SILK PLA FOR THE WALLMOUNT AS THIS WOULD NOT HOLD YOUR GUITAR FOR THE LONG TERM!!! I'M NOT RESPONSIBLE FOR ANY DAMAGE WHEN YOU CHOOSE ANOTHER MATERIAL AS SPECIFIED HERE! IN GENERAL I WOULD RECOMMEND CF-FILAMENTS FOR THE WALLMOUNT.

 

EDIT (13.03.2025, 07:00 Germany): I created another Wallmount V2 profile which is also printable in PLA and should hold your guitar for the long term. The guitar holder can be also printed in other materials. I still do NOT recommend to use MATT or SILK PLA!

 

Assembly:

 

 

Troubleshooting (when the mechanism doesn't move):

• Fasten the screws completely and then turn them back a little. The screws are used as axis and not for fastening the lockers ;)
• Make sure that the supports from the following part are completely cleaned! Otherwise the lockers will not rotate properly and may get stuck.

 

Enjoy my new guitar holder and feel free to boost me any time ;)

Boost Me

 

BR & happy printing!

B@sti