Safety Clasp Pin - 1x4inch - SimpleTag Nametag

A 1" x 4" nametag that can be used with safety clasp (safety pin style) pins to be attached to a shirt or anything else.

1. Print Nametag
2. Print Backplate
3. Snap the backplate and pin in place.
4. Customize insert text in Bambu Studio
5. Print Insert
6. Clip insert into nametag
7. Done.

Details and Information

SimpleTag is a collection of nametags, inserts, and accessories for alternate use cases .

This model is for the 1x4 inch safety clasp variant - the inserts can be printed from the butterfly clutch variant here - https://makerworld.com/en/models/890568

*These are slightly thicker than the butterfly clutch style so they dont fit the current desk base in the collection

The model contains 2 parts:

1. Nametag frame/base
2. Nametag backplate

Nametag Frame/Base

• 2mm border width
• 2.6mm border thickness (gives some depth for using hueforge inserts with more detail)
• slight angle to help keep the displayed text/image from pointing down when attached to a shirt
• tapered inset to account for variances in insert size
• holes to allow removing inserts to change them
• notches to clip in backplate

Nametag Backplate

• used to mount the safet clasp pin to the back of the base
• can be removed with a thin object
• includes a nub to keep the safety pin from moving around too much

The Inserts Customization - inserts can be downloaded here - https://makerworld.com/en/models/846714

The text can all be easily edited in Bambu Studio.

You can also just import SVG's into Bambu Studio onto the Blank insert template

There have been some templates provided in the print profiles.

* Notes *

• Bambu Studio changes dimensions from the center of the object
• If you increase text thickness double check the Z-Height of the text is at 1.3mm (World Coordinates)
• If changed text has a different number of characters you may need to recenter the text

There are also an assortment of work position tags premade in the profiles.

• Blank 1mm insert
• Name ONLY (1mm insert with 0.6mm text on top)
• Name and Position (1mm insert with 0.6mm text on top)

Required Parts

1. Safety Clasp Pins
   1. Designed to fit 38mm length pins
   2. Should fit shorter pins as well as slighlty wider pins

You can buy them on Amazon for around 10 cents each and even cheaper on Aliexpress

Other Models in SimpleTag Collection: https://makerworld.com/en/collections/3733512-fritz3d-simpletag-name-tags