Origami Foldable Measuring Spoon - TBSP/ML

MembershipIf you wish to sell prints from my designs please check out my commercial license membership :)

UPDATE: It was brought to my attention that the spoons don't stay closed for some of you. I am sorry for this. The TPU i tried so far and worked for me are: BambuLab 95A HF, Eryone TPU High Speed. Polymaker was a bit stiff

I made the popular foldable measuring spoon available for 3d printing!
 

Must be printed in TPU ( I used 95A shore TPU)
You Must use neodymium magnets.  The design was made with the strength of neodymium magnets in mind.

I added a pause at layer 16 so you can embed the magnets.
You need: 8pc - 10x2mm magnets for the big spoon
                   4pc - 8x2mm magnets and 2pc -  4x2mm magnets for the small spoon

You don't need glue for the magnets as long as you use a stainless steel nozzle.
Please make sure you place the magnets in the correct orientation.

The spoons should be stored flat, not folded in a certain position. For example you can stick them on your fridge or as a bookmark in you cooking book! If they are kept folded, the tpu can stretch in that position and won't work properly after some time.