Saw/Router height gauge

Measurement tool for setting up a table saw or router table height. The base part can measure from 1/16" to 1". If you install the additional extension legs it will measure from 1-1/16" to 2".
I designed this with holes to press fit an 8x3mm magnet in. The magnets have several purposes. They can be used for storing the tool on something metal. They also help keep it in place on your metal table saw or router table. They also help keep the extension legs in place. These can be stored on the magnets on the top of the tool.

There are also holes build into it to hang on a nail or screw if that works better in your shop.

**NOTE** When you're pressing the magnets in, be sure you press them in flush or just beyond flush or this will change the accuracy of the measurement tool. You should also double check the polarity of the magnets so that the main tool and extension legs hold together and don't repel each other.

 

Boost MePlease boost if you enjoy this model.