Cardboard Spool Divided Container (Wolf/Lion Lids)

Please use the settings that I have assigned in the print profile for the wolf and lion lids. If you do not want to use those lids than normal lids are also available. 

Note: The bambu labs cardboard spools can vary in diameter. If it is too loose then please wait until you have another. The PLA cardboard spools that Ive used have been a consistent diameter. However, the cardboard spools from off of other materials seemed to be a smaller diameter.

Please use 0.08mm layer height. 

0.4mm nozzle

Initial layer height 0.16mm

Infill set to 100%

 

You do not have to use the colors that I used. If you do change the colors, I do recommend going from darkest color to lightest color. 

Boost MeIf you like this model then please boost. It helps support this channel and gives us motivation to keep designing for you all!

Wolf

• Layer 1 - 158: Black
• Layer 159 - 162 : Dark brown
• Layer 163 - 165: Desert tan
• Layer 166 - 171: White

        No AMS

• Black Start
• Add pause at layer 159 and swap to dark brown
• Add pause at layer 163 and swap to desert tan
• Add pause at layer 166 and swap to white

Lion

• Layer 1 - 119: Black
• Layer 120 - 126: Brown
• Layer 127 - 133: Desert Tan
• Layer 134 - 141: White

      No AMS

• Black Start
• Add pause at layer 120 and swap to brown
• Add pause at layer 127 and swap to desert tan
• Add pause at layer 134 and swap to white