Mechanical Flip Book Horse Running No AMS nedded

Description: This its an amazing flip book mechanism that shows a horse running when turned. Now because I have all the basics parts designed its really easy to change the animation so if you have an animation you want in one of this flipbooks let me know.

 

Times: 

Modeled time: 36 hours

Printing time: 2 hours

Assembly time: <10 minutes if you are smart

 

Instructions for printers without AMS:

If you don't have a AMS module the print profile “No AMS” has pauses on the plate of the frames. Every time the printer pauses you should change the filament. For the models you see in the gif the combination was:

Started with: white 

The printer stopped after layer 1: I changed the color to red

The printer stopped after layer 2: I changed the color to white

The printer stopped after layer 2: I changed the color to red

Remember that the printer has to purge filament every time the color changes.

Are you interested in fast changing filament I have develop a way of doing this manually and I'm creating a video about that in my channel make sure to subscribe to know when its out.

 

Assembly Instructions:

I will be uploading a video soon about the model, and it will have the assembly instructions. Make sure to subscribe to know when its out. And it will go here-→

 

Video(>) https://www.youtube.com/watch?v=h58TYkDQlQI&t=80s

 

If you don't want to watch the whole video you can follow this instructions.

Familiarize yourself with the names I have given to the different parts I'm sure they aren't the right names but this is what I call them.

• Step 1: Glue the crank and the end cap  to both ends of the axle.
• Step 2: Position the axle so the crank its to your right and the end cap its to your left. Position the frames so that you can see the number and the tabs are apposite to you (or in other words the numbers are in the right orientation and not upside down) 
• Step 3: Add the frames add the frame 1 to two holes (one in each side) in between the end cap and the crank. the add the frame 2 beside that frame (on different holes) so that the frame 2 its on top the frame 1. Repeat that process for the rest of all the frame sand holes.
• Step 4: Put it all together by positioning the axle with the frames so the crank its to the left and the base so you see the back of it (if you are not sure you know which is the back, its the side that comes up when you print it) 
• Step 5: Give me a boost really important for the flipbook mechanism to work. Just kidding I would appreciate it a lot if you would :) 
  Step 6: Turn the crank anti clockwise and enjoy. Thanks for printing. Let me know how it turns out.

Commercial license: 
I'm working on a patreon account let me know if you are interests in a patreon account.

If you see mi model being sold as a file or printed let me know.

 

 

If you are still reading it means you have a issue or questions please contact me: [email protected]

Boost MePlease it make a big difference. If you did thanks  

Check my other models!!!