January 2, 2024
Description
I've been using these bottle holders for a while now and realized that separating the hooks from the main body is unnecessary. Printing the part with supports is not challenging, and it doesn't require the extra durability that horizontally printed hooks provide. Moreover, assembling them is quite cumbersome. Consequently, I've integrated fixed hooks into all the bottle holders. These hooks are designed to fit snugly, ensuring maximum friction and preventing them from becoming loose.
Below is a partial list of the available sizes, accompanied by examples, compiled by the creator of the model:
| Bottle Diameter | SKADIS Holder Diameter | Example |
|---|---|---|
| D 40.00 mm | D 40.50 mm | Clipper Lighter gas |
| D 45.20 mm | D 45.70 mm | OIL 100ml |
| D 49.00 mm | D 49.50 mm | silicone/glue cartridge… |
| D 53.00 mm | D 53.50 mm | WD40, Grease spray 200ml/250ml |
| D 57.75 mm | D 58.25 mm | WD40 300ml… |
| D 66.20 mm | D 66.50 mm | Standard BEER/SODA CAN 330ml Standard Spray Paint 400ml… |
| D 80.00 mm | D 80.50 mm | Isopropanol 1000 ml |
For a permanent installation I recommend using the Lock Plug I attached to prevent the holder from sliding out of the pegboard holes when you retrieve your bottle although this is optional as the three hooks provide a lot of friction. Depending on your print settings, filament and board, you might have to choose another size.
I am constantly developing more IKEA Skadis attachments. Check out my IKEA Skadis Collection here.
License:
BY-NC-SA
AU3D
