R. E. P. O. character (Semibot) tumble Q

Hey, I created this model of a robot (Semibot) from a game R. E. P. O. in the tumble position (Q)

 

Crown (KING OF THE LOSERS!) for your semi-bot friends here: 

https://makerworld.com/en/models/1406137-crown-r-e-p-o-king-of-the-losers#profileId-1459034 

 

 

This model is partially movable, you can open its mouth and move its arms. If your printer tolerances are set right, you can rotate its eyes so that it can look in different directions.

 

I added a hand with claw, which must be bend after printing.

 

Assembly requires no glue, the parts are held together by tolerances. A few millimeters of filament are used to connect the head and neck together.

 

A piece of filament is used to connect the head and neck together.

 

Updates:

• I made the hinge stronger without adding more bulk to the model. However, assembly still requires some carefullness. I would recommend placing the hinge on the edge of a table and pressing the filament from above using tweezers or pliers.
• I adjusted the size of the peg on hands, they should now fit really snugly
• I added a version of the right hand with a claw
• I redid the eyes, NOW you can print the pupils on another plate and just insert them into the holes inside the whites of the eyes (no glue or sharpie needed).

 

I also created a model of this robot standing which you can find here: https://makerworld.com/en/models/1203341-r-e-p-o-character-semibot#profileId-1216706

 

Happy printing

 

Share your thoughts and show off your prints in the comments!

 

Boost MeI would really appreciate a boost if you liked my model 😉

 

If you would like to support me or just get a commercial license for this model, you can do so here:

https://www.patreon.com/inv4d3r/shop/r-e-p-o-character-semibot-tumble-q-1484169 

Purchasing grants you a commercial license to sell physical prints of this design (the digital version cannot be sold or shared)