Guitar Pick Box

Hello everyone,

I have added a profile just for the spring! Thank you. 

This guitar pick box has a way to pop up the next pick for you. 
It works perfectly for 0.81 mm pick and 0.71 mm pick. You should be able to fit in 8 to 10 picks in the box.
The print file includes a box, a spring, a holder and a 0.81 mm pick. Please follow the  pre-set configuration with the print file to print it, and you will need to have a small pillars to remove the support from the box.
To assemble it, firstly, please connect the spring and the holder by placing the spring joint part to the slot in the holder. Make sure you have the end of the spring wire facing to the top of the holder. Then make an angle of the holder and spring combination to push it to the box and make sure the spring joint part at the other end of the spring facing to the slot in the bottom of the box, so the spring can be placed in the right place. Once you have both spring and holder in the box, just tweak the position of the holder by tapping the sides of the holder, It will help to make sure the spring and the holder are in the right place. You can now push in your picks into the box and pick them up when you need them.
Enjoy!