"The Hooting Owl" Call

Hooting owl call. Print this guy, go outdoors and talk to the owls…or turkeys ;)  They WILL talk (or hoot/gobble) back! Seriously :)

 

Instructions:

1. Print main components on 1 plate as profile is configured.
2. Tree supports inside sound board body helps with back stop features.  They are a little hard to remove but worth it for optimal sound. Use a small rod or tweezers to help with removal.
3. Print reed on 2nd plate without adjusting any object settings   .11mm layers 3x (I found this to produce the best result)

Assembly:

1. Place reed on toning board and slide until it banks on small backing… placement is very important!  Aim for how I have it pictured for best results.  Feel free to experiment though. TEXTURED SIDE UP!
2. Slide wedge into place (larger side in until it bottoms out.. snug fit)

 

3. Slide into main body on smaller diameter side – opposite of owl logo

 

How to use

Hold it up to your mouth and say “Who cooks for you, who cooks for you all”  while cupping your hands over the end… as shown…

do not blow excessively.  Just aim for the same amount of force you would use when whistling. Practice makes perfect :)

 

 

Now get out there and start hooting ;)

 

Print a wall mount owl to hang your call when not in use!! (click pic for link)

 

Boost MeBoost for hoots!