Redcat Gen9 Scout Raised Bumper Mount

Looking for a little more clearance up front when climbing those obstacles, look no further. Simply unbolt your old bumper mount and mount this one in it's place and gain almost 10mm of extra clearance. Trust me when I say it makes a huge difference!

The only modification needed is some notches in the body for clearance since the bumper sits higher. I cut my notches roughly 12mm wide and 10mm tall. If cutting the body of your RC makes you nervous and you don't have a RV hole reamer, get one! They make jobs like this sooo much easier. Just mark the center of your hole and then use the reamer to cut the hole and then use a side cutters or nips to extend the hole down.  See my links for where to buy on Amazon if your curious.

If you buy the Redcat light kit for your rig, which I highly recommend, I have models for 3d printed retainer clips which work way way better than hot glue:

https://makerworld.com/en/models/2290675-redcat-gen9-scout-retainer-clip-rock-lights#profileId-2499325

https://makerworld.com/en/models/2290665-redcat-gen9-scout-light-kit-retainer-clip#profileId-2499314