Pokemon Blastoise Tag Bolt

Boost MeLike this print? Please consider giving it a boost!

 

Project: Blastoise Tag Bolt

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200.23mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
    PLA+ Sunlu White Transmission Distance: 5
    PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #16 (1.36mm) swap to Ice Blue
    At layer #22 (1.84mm) swap to White
    At layer #23 (1.92mm) swap to Beige for the rest.