Bubble Level Angle Gauges Finder Tool 1-45 degrees

Boost MeIf you find this useful, I would appreciate a boost!  I am trying to get to the moon :D

 

This model is 45 individual pieces.  Each piece is a different angle from horizontal that you can use to identify how many degrees a surface is off of level.  This can be useful when designing other models and you need to know what angle you need to put on a model so that it sits perfectly level on a surface.  You simply print out the size range you need (or all of them to have them on hand) and use your standard 10x30mm bubble level device (link to example below) to sit in the pocket of the angle gauges to see which one gives you the most level reading.  Each piece is numbered to reflect the angle it rises for easy identification. 

 

There are 3 print profiles, choose which one you need, or print all 3 to have them all on hand.

• 1 degree thru 15 degrees
• 16 degrees thru 30 degrees
• 31 degrees thru 45 degrees

All of the profiles are single color and will print on an A1 mini plate or larger.

 

https://www.amazon.com/Picture-Hanging-10x10x29mm-Square-Measuring/dp/B07DMF57KM/