SHOWER HEAD HOLDER | 35°

Minimalistic shower head holder consisting of a holder and a bracket for wall mounting. The holder is angled at 35 degrees. The bracket allows for flexible hole spacing and easier installation.

 

Tested over weeks—still holding up perfectly.

Boost MePlease consider leaving a boost. Your support allows me to create new designs. Thx.

Printing recommendations:

Material: PLA or PETG (Photo: Prusament PLA Marble Grey)
Print: Optimized for 0.4mm nozzle, 0.2mm layer height 

 

Assembly:

1. Align the bracket on the wall (a spirit level is recommended).
2. Mark, drill, and secure with wall plugs or screws.
3. Push the holder onto the bracket and tighten with an M3 socket head cap screw (12-18mm)