Wargreymon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 145.11x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Orange
    At layer #18 (1.52mm) swap to Yellow
    At layer #20 (1.68mm) swap to Jade White
    At layer #27 (2.24mm) swap to Black for the rest.