Cute Pikachu Samurai

Boost MeLet me know if you like this model by boosting it

 

Please do not resize the height of this model.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

 

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA+ Sunlu White Transmission Distance: 5
    PLA BambuLab Basic Brown Transmission Distance: 2
    PLA+ Sunlu Yellow Transmission Distance: 10
This print uses 4 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to White
    At layer #13 (1.12mm) swap to Brown
    At layer #16 (1.36mm) swap to Yellow
    At layer #23 (1.92mm) swap to White for the rest.