Cute Squirtle Samurai

Boost MeLet me know if you like this model by boosting it

Please do not resize the height of this model.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 199.52x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

 

Filaments Used:
    PLA PolyTerra Army Blue Transmission Distance: 0.3
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
    PLA BambuLab Basic Brown Transmission Distance: 2
This print uses 4 unique filaments

 

Swap Instructions:
    Start with Army Blue
    At layer #8 (0.72mm) swap to Jade White
    At layer #13 (1.12mm) swap to Ice Blue
    At layer #16 (1.36mm) swap to Brown
    At layer #22 (1.84mm) swap to Jade White for the rest.